Skip to content
Kabeleria Cables made to measure
View settings: text size and contrast

These settings apply in this browser only. They are stored on your device and are never transmitted.

Text size
Display

Battery cable FLY-B 25mm²

What should it be?Configured means: cut to length and fitted with terminals, ready to connect. By the metre means: cut to length only, both ends left open, no terminals.

From 10cm up to 2400cm.
End 1
End 2

—

Orders with a goods value below 30.00 € carry a small-order surcharge of 5.00 €.

Share this configuration

We create a short address for it. Whoever opens it sees exactly this configuration.

Technical data

Battery cable FLY-B 25mm²
Cross-section 25mm²
Standard ISO 6722
Strands 196 × 0.4mm
Rated voltage60V
Weight per metre 282g
Manufacturer Prazanta Lda
Chão Seco Caixa 1316
6230-788 Vale de Prazeres
Portugal
info@kabeleria.com

Terminals for this cross-section

Type Hole Weight
Ring terminal M6 12g
Ring terminal M8 13.1g
Ring terminal M10 15.7g
Ring terminal, angled 90° M6 12g
Ring terminal, angled 90° M8 13.1g
Ring terminal, angled 90° M10 15.7g
Ring terminal, angled 45° M6 12g
Ring terminal, angled 45° M8 13.1g
Ring terminal, angled 45° M10 15.7g
Pin terminal — 6.3g

How the angle is counted

The cable seen from the side. End 1 on the left, end 2 on the right, both lugs lying along the cable axis and pointing outwards. To the right of them an eye with an arrow pointing along the cable at the lug of end 2.

Viewing direction: from outside onto end 2, with the cable running away behind the lug.

  • View onto end 2. The lug points straight up and covers the lug of end 1 exactly.

    0°

    Both lugs lie in the same plane.

  • View onto end 2. The lug of end 1 is dashed and points up, the lug of end 2 points left. An arrow runs counter-clockwise to it.

    90°

    A quarter turn counter-clockwise.

  • View onto end 2. The lug of end 1 is dashed and points up, the lug of end 2 points down. An arrow runs counter-clockwise to it.

    180°

    End 2 points exactly opposite end 1.

  • View onto end 2. The lug of end 1 is dashed and points up, the lug of end 2 points right. An arrow runs counter-clockwise past the left and the bottom to it.

    270°

    Three quarter turns counter-clockwise, which is a quarter turn clockwise.

The angle is set during manufacture and cannot be changed afterwards. Made to measure, so the right of withdrawal does not apply.

Cut and assembled to order. Made to measure, so the right of withdrawal does not apply.

Reviews

No review yet. The first one comes from a customer after delivery.

All reviews come from customers we invited by email after delivery. No order, no review. We publish every review, critical ones included, and hide only posts with insults or details about third parties.